logo search
Практический курс технического перевода

2.10 Перевод чертежей

1. Do not use appliance for other than intended use. 2. Do not leave unattended when in use. 3. Personnel must be appropriately trained and qualified. 4. Improper repairs can lead to considerable hazards for the user. 5. Do not place a faulty appliance into operation. 6. Do not pull on the connection cord, but rather on the plug, to separate the appliance from the mains. 7. Have repairs and adjustments on the appliance performed by a trained engineer from our customer services department. 8. Worn-out appliances must be made unusable immediately by pulling out the mains plug and cutting through the connection cord and removing the plug. Then dispose of the appliance properly. 9. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. 10. Do not use outdoors. 11. Make sure the ring nut of the supply pipe is firmly tightened; the detergent dispenser is not plugged and the drainage pipe is firmly fixed. 12. Under no circumstances should you try to repair the set yourself, as this would invalidate the guarantee. 13. The camera's automatic redeye reduction feature helps to eliminate the red pupils in pictures of people or pets. 14. Cleaning the sewing machine: brush out the lint around the feed dogs to the front by using the lint brush or use a vacuum cleaner. 15. Insert a new needle into the needle clamp with the flat side to the back until the top of the needle touches the edge of the needle bar, then tighten the needle clamp screw on the left. 16. It is forbidden to work with dangerous voltages and machines in the laboratories and workshops if a person who is familiar with the operation of the equipment is not within sight or earshot. 17. Work area shall be roped off and clearly marked so as to eliminate the risk of unintentional contact by unauthorised persons; no unauthorised person should be allowed within the roped-off area while an experiment is in progress. 18. All persons present in the laboratories and workshops must exercise caution around connections that may be live; never touch equipment or connections unless you have personally verified that the circuits are dead. 19. Water must never be used in attempts to extinguish a fire in a laboratory set-up that is powered; carbonic acid or powder should be used instead. 20. A fault current circuit breaker for personal protection (30 mA) reduces the danger from electrical appliances that are accidentally dropped into water.